Removal Instructions

Taking your hair system off can be tricky and a little dangerous if you don’t know the right procedure. The material is quite delicate and you could risk tearing or damaging the system. If you’re looking for an easy and safe way to remove your hair system, maybe we can help. Just follow the instructions below to reduce hassle and minimize the potential for hair system damage.

Step 1: Applying adhesive remover

Firstly, find your spray-on or dab-on adhesive remover and apply it directly on the area of your hair system that is secured to your scalp.Allow the solvent to soak in and break down the bond for a few minutes before continuing to the next step.

Step 2: Begin peeling hair system from the back

In order to avoid damaging your front hairline, we recommend always removing your hair system from back to front. Start by using the tips of your finger to feel around for the very back edge of the unit. Now spray your makeup pad with isopropyl alcohol until it's soaked

Step 3: Peel up back of hair system until removed

Once you’ve located the back edge, gently scrap across it with your fingernail. All you need to do is peel up enough of the base so you can grab onto it tight with your fingers. While peeling your hair system off from the back, use your isopropyl-alcohol-soaked makeup pad between the bottom of the base and your scalp. This will help break down the adhesive and make the system easier to peel off.